To make the most of your new investment, please READ and SAVE.

IMPORTANT NOTE: Some keys have two different functions. One is for the "normal mode" and the other is for the "programming mode".
SPECIAL FEATURES: Real-Time Time Clock - Programmable Economy Mode - Infrared Remote Control (Option) - Inhouse / Outdoor Remoter (Option)

Pump 1 Key
If Pump 1 is a single speed pump, the Pump 1 key is used to turn it on and off. If Pump 1 is a two speed pump, the Pump 1 key is used to turn it on and to select between off, low and high speeds. A built-in timer will shut the pump off 20 minutes after it has been started unless the user does so manually.

Pump 1 Symbol
The Pump 1 symbol will appear on the LCD display when the Pump 1 is running at high speed. The symbol will blink when the pump is running at low speed.

Pump 2 Key
If Pump 2 is a single speed pump, the Pump 2 key is used to turn it on and off. If Pump 2 is a two speed pump, the Pump 2 key is used to turn it on and to select between off, low and high speeds. A built-in timer will shut the pump off 20 minutes after it has been started unless the user does so manually.

Pump 2 Symbol
The Pump 2 symbol will appear on the LCD display when the Pump 2 is running.

Up/Down Arrows
Up and Down arrow keys are used to set the temperature of the water. Keeping pressure on the keys will increase (or decrease) the current temperature setting. The new and desired temperature setting will remain for 5 seconds on the LCD display as a confirmation of it's new value.

Set Point Symbol
The appearance of the Set Point symbol on the LCD display tells the user that the temperature shown is the desired, and not the actual temperature of the water. The temperature can be adjusted in 1ºF increments from 40ºF to 104ºF (or 4ºC to 40ºC.).

Water Heater Automatic Start
When the water temperature if 1ºF lower than the set point, the pump (at low speed if it is a two speed pump) and the heater will be turned on until the water temperature reaches the set point plus 1ºF.

Heater "ON" Symbol
The Heater On symbol will appear on the LCD display when the heater is on. The Heater On Light symbol will blink on the LCD display whenever there is a call for heat and the heater has not yet been turned on.

Blower Key
The Blower key is used to turn the blower on or off and to select blower speeds. The first press of the blower key will turn the blower on at high speed. A second (or third) press of the blower key will change the blower speed from high to medium (or medium to low) speed. The fourth press will turn the blower off. A built-in timer will shut the blower off after 20 minutes if it has not been shut off manually.

Blower Symbol
When the blower is on, the Blower symbol will appear on the LCD display (it will blink if the speed is at medium or low).

Light Key
The Light key is used to turn light on or off and to select light intensities. The first press of the Light key will turn the light on at its highest intensity. A second (or third) press will change the light intensity from high to medium (or from medium to low) intensity. A fourth press will turn the light off. The light will automatically turn itself off after 2 hours.

Light Symbol
When the light is on the Light symbol will appear on the LCD display (it will blink if the intensity is at medium or low).

Program Key
The Program key is used to switch between normal and programming modes.

Program Mode Symbol
The Program mode symbol will appear in the LCD window when the unit is in programming mode. Refer to the programming section for more details.

Economy/Normal Mode Key
This key is used to switch from the Normal Mode to the Economy Mode. In Economy Mode, the set point will be at 20ºF below the normal set point.

Economy/Normal Mode Symbol
The Economy Mode symbol appearing in the LCD window indicates to the user that the Economy Mode is on. The system can also be configured to automatically switch to the Economy Mode at certain periods of the day (see programming features). In this case, using the Economy / Normal Mode switch will override the automatic function until the next programmed cycle.

Temperature Display
In Normal Mode operation, the display alternates between the current time and the actual water temperature. The display alternates every 5 seconds.

Summary of LCD Window Codes
C Celsius
CL Current Time of Day
ECdu Economy Mode Duration
Econ Economy Mode Turn On
F Fahrenheit
Fldu Filter Cycle Duration
Flon Filter Cycle Turn On
FLC Pressure Switch Alarm
FLO Pressure Switch Alarm
FrEE Freeze Protection Alarm
HL High Temperature Alarm
Loc Panel / Keypad Locked
PrH Temperature Sensors Alarm
Prr Temperature Sensors Alarm
Tu Temperature Set Celsius
Tu Temperature Set Fahrenheit