Infrared Remote Control

To make the most of your new investment, please READ and SAVE.

WATER RESISTANT, NOT WATERPROOF!
Do not use or drop the handheld remote in the spa. It will not float!

The optional Infrared Remote Control allows you to control the four basic functions of your spa from any location within 20 feet of your spa or remote control panel.

Pump 1

Pump 2

Accessory

Light

Each key performs in exactly the same manner as its counterpart on the main keypad.
Please refer to the User’s Manual for your spa’s main keypad control for detailed operating information.

BATTERIES: This unit is powered by two “AAA” batteries. To change the batteries:

  1. Unscrew the plate on the back of the control.
  2. Remove the old batteries.
  3. Insert the new batteries.
  4. Replace the back plate.
Take care not to over tighten the screws holding the back plate. Stripping of these screws can result in the loss of the control's watertight seal.