To make the most of your new investment, please READ and SAVE.
IMPORTANT NOTE: Some keys have two different functions. One is for the "normal mode" and the other is for the "programming mode".

SPECIAL FEATURES
Real-Time Time Clock
Accepts Auxiliary Spaside Control

This optional Auxiliary Spa Side Control allows you to control the four basic functions of your spa from a convenient secondary location.

Pump 1 Key
If Pump 1 is a single speed pump, the Pump 1 key is used to turn it on and off. If Pump 1 is a two speed pump, the Pump 1 key is used to turn it on and to select between off, low and high speeds. A built-in timer will shut the pump off 20 minutes after it has been started unless the user does so manually.

Pump 1 Symbol
The Pump 1 symbol will appear in the LCD window when the Pump 1 is running at high speed. The symbol will blink when the pump is running at low speed.

Pump 2 Key
If Pump 2 is a single speed pump, the Pump 2 key is used to turn it on and off. If Pump 2 is a two speed pump, the Pump 2 key is used to turn it on and to select between off, low and high speeds. A built-in timer will shut the pump off 20 minutes after it has been started unless the user does so manually.

Pump 2 Symbol
The Pump 2 symbol will appear in the LCD window when the Pump 2 is running at high speed. The symbol will blink when the pump is running at low speed.

Up and Down Arrows
Up and Down arrow keys are used to set the temperature of the water. Keeping pressure on the keys will the increase (or decrease) the current temperature setting. The new and desired temperature setting will remain for 5 seconds in the LCD window as a confirmation of it's new value.

Set Point Symbol
The appearance of the Set Point symbol in the LCD window tells the user that the temperature shown is the desired, and not the actual temperature of the water. The temperature can be adjusted in 1ºF

Accesory/List Key
This key is used to turn a blower or accessory (e.g. additional therapy pump or other "Advanced Spa System Accessory") on or off. If the accessory is a multiple speed blower, the first press of the accessory key will turn the blower on at high speed. A second (or third) press of the blower key will change the blower speed from high to medium (or medium to low) speed. The fourth press will turn the blower off. A built-in timer will shut the accessory off after 20 minutes if it has not been shut off manually. The Accessory/LIST key may be used for advanced programming functions.

Accesory Symbol
When the accessory is on, the Accessory symbol will appear in the LCD window (it will blink if the speed is at medium or low).

Light/Enter Key
The Light key is used to turn the light on or off and to select light intensities. The first press of the Light key will turn the light on at its highest intensity. A second (or third) press will change the light intensity from high to medium (or from medium to low) intensity (if multiple intensities are available). A fourth press will turn the light off. The light will automatically turn itself off after 2 hours. The Light/ENTER key may be used for advanced programming functions.

Light Symbol
When the light is on the Light symbol will appear in the LCD window (it will blink if the intensity is at medium or low).

Program Key
The Program key is used to switch between normal and programming modes. Pressing and holding this key for 5 seconds enters the programming mode. See "Programming" on back".

Program Symbol
The Program mode symbol will appear in the LCD window when the unit is in programming mode. Refer to the programming section for more details.

Temperature Display
In Normal Mode operation, the display alternates between the current time and the actual water temperature. The display alternates every 5 seconds.

Water Heater Automatic Start
When the water temperature is 1ºF lower than the set point, the pump (at low speed if it is a two speed pump) and the heater will be turned on until the water temperature reaches the set point plus 1ºF.

Heater "ON" Symbol
The Heater On symbol will appear in the LCD window when the heater is on. The Heater On Light symbol will blink in the LCD window whenever there is a call for heat and the heater has not yet turned on.

Summary of LCD Window Codes
Ec1 Economy Mode 1
Ec2 Economy Mode 2
FrEE Freeze Protection Alarm
FS See Filter Cycle Start Time
Fd See Filter Duration
FLC Pressure Switch Alarm
FLO Pressure Switch Alarm
HL High Temperature Alarm
Loc0 Panel / Keypad Unlocked
Loc1 Panel / Keypad Locked
noEc See Normal Operation Mode
PrH Temperature Sensors Alarm
Prr Temperature Sensors Alarm
TuC Temperature Set Celsius
TuF Temperature Set Fahrenheit