HEATER

The stainless steel or plastic manifold contains an electrical heating element.

Your equipment system may have a convertible heater (120 volts; or 240 volts). Refer to the equipment data label to determine which, if any, convertible options are available to you. The heater configuration was set by the factory and may have been changed by your installer. Your equipment system will operate with one of the following configurations: 120 VOLT - The heater operates on demand at 1500/1080 Watts during low speed pump operation. It will automatically shut off when the high speed pump and / or blower is activated. You can expect a heat rise of approximately 1º to 2º per hour. 240 VOLT - The heater operates on demand at 6000/4320Watts during high and low speed pump operation. It will continue to operate when the blower is activated. You can expect a heat rise of approximately 6º to 8º per hour.