CONTROL SYSTEMS OPERATION MANUAL
Congratulations on your new spa purchase. It utilizes a HYDRO-QUIP equipment system, constructed of the finest materials and assembled under the strictest quality control standards. With proper care and maintenance your equipment system will provide you with many years of reliable performance. The following pages contain information necessary for the operation and care of your equipment system. The illustrations and configurations are meant to be a guide only and may differ slightly from the actual unit you have in your spa.
CONTROL SYSTEMS ILLUSTRATIONS & OPERATION

100 & 101

300

500

500T

600

600T

Equipment Data Label

Safety Instructions

1- GFCI-Ground Fault Circuit Interrupter
2- Thermostat
3- Heater "ON" Light
4- Spa Side Control
5- Program Mode Switch
6- Timer
7- Overheat Protection Reset
8- System Mis-Wire Light (Optional)
9- Control Box
10- Heater
11- Light
12- Jet Pump
13- Auxilliary Jet Pump
14- Blower
15- Power Supply Access Hole

OPERATIONAL CONSIDERATIONS
The following considerations will prolong the life of your Equipment System and provide you with many years of reliable operation.
  • Blower
  • Warm Weather Operation
  • Spa Side Control Buttons
  • High Water Temperature
  • Start Up Procedures
  • Electrical Installation
  • Filtration
  • Chemical Water Treatment
  • Freeze Protection / Winterizing
  • Troubleshooting
  • Limited Warranty
  • Back to Technical Information